Fixed Frame Stencils, Laser Cut Stencils, Solder Paste Stencils
Integrated Ideas &

AXIS Laser Stencil Command Center® Precision Laser Cut Stencils

 Technologies, Inc.
            IIT Home File Upload Order Online    Contact UsAbout IIT
 

 Fixed Frame Stencils

 Traditional fixed frame stencils are an IIT specialty. IIT's standard fixed frame stencils are anything but standard. These permanently bonded stencils utilize an exclusive border treatment that combined with our epoxy process, creates a bond that will not fail, never leaving you, or your plate, hanging. IIT stocks all rigid sizes and has a complete frame fabrication capability so you are never left waiting.

  • Proprietary Permafid®
  • process creates permanent non-removable non-fading fiducials.
  • Exclusive performance enhancing stencil design modifications, are tailored specifically for each customer.
  • 100% laser cut with gas assist, ensuring the finest quality finish available.
  • All IIT stencils are double bonded to withstand extreme wear.
Fiducials

Fiducials on stencils are alignment marks used in conjunction with board fids for registering the PC board to the stencil. Full cut fiducials are typically used for manual alignment. 1/2 cut fiducials are used on printers with vision systems and must be dark, crisp and permanent.

Typically, stencil manufacturers will cut a cavity in the stencil and fill it with black epoxy. There are several problems associated with this process. During application, epoxy can be smeared, leaving a tail or haze on the stencil that will compromise fiducial recognition. Secondly, epoxy popping out of the stencil during the cleaning process can result in a line down. Thirdly, if the operator is not careful, epoxy could collect in delicate SMT apertures compromising proper paste deposition and release.

Seeing the need for an exact permanent fiducial process that cannot fail or compromise the stencil, IIT developed the IIT Permafid® Process. IIT Permafid® is an exclusive IIT process which the stencil is permanently branded through laser parameter manipulation rendering a crisp accurate permanent fiducial, thus eliminating the use of epoxy.

*IIT Permafid® is an exclusive registered trademark name of Integrated Ideas & Technologies, Inc.

Call Sales at (208) 262-7200 or write us at info@integratedideas.com for further information.

 Back to top